Hex Washer Head Tapcon Concrete Screws

The use of a special fastener for concrete surfaces like a washer head tapcon is prohibited.

They come in 3/ 1/ 4 and 3/ 1 standard diameters.

A unique ClimasealTM coating prevents rusting by coating the screws.

A large bearing surface is provided by the hex washer head design, which makes it simple to install with a driver.

Low-carbon steel SAE1022 is used to make the screws.

They have double lead HI-L threads, each having 11 threads per inch on the 3/16 "diameter and 15 threads per inch on the 1 1/4" diameter.

Technical Parameters:

3/ 16 "and 1/4" in diameter.

Available in a variety of lengths, from 1 to 1/ 4 to 6/ 6.

Thread Length: 1- 5/ 8 "for most lengths, with the exception of the 1- 1/ 4" length, which has threads that are 1- 1/ 8".

Head Diameter: 1/ 3/ 1 for the 3/ 1 diameter screws, and 1/ 1/ 1 diameter screws, respectively.

Head height is 0.140 "for the 3/16" diameter screws, and 0.180 "for the 1 1/4" diameter screws.

Drivers are 1/4 "for the 3/16" diameter screws and 1/4 "for the 1/4" diameter screws.

High standards of quality and performance are achieved when making Tapcon screws.

The desired shape and size are created using low-carbon steel.

To increase corrosion resistance, the screws are then coated with ClimasealTM.

Finally, the screws have been delivered and shipped out.

For fastening materials to concrete surfaces, DIY and heat-washing materials are frequently used in construction projects and DIY projects.

They are appropriate for tasks like putting electrical boxes, installing hardware, or putting wood or metal framing on concrete walls or floors.

Q1: How are these screws installed?

A1: To install Hex Washer Head Tapcon Concrete Screws, simply drill a hole in the concrete or masonry surface, screw it in, use a driver to tighten it, and then install the screw.

Q2: When installed, can these screws be taken out?

A2: Yes, these screws can be easily taken out if required. The anchor will emerge from the hole as a result of simply untying the screw.

Q3:What coating do the Tapcon screws have?

A3: unique ClimasealTM coating, which prevents rusting, is applied to the screws.

Q4: What size driver is suggested for these screws?

A: 1/4 "driver is required for the 3/16" diameter screws, and the 5/16 "driver for the 1 1/4" diameter screws.

Hex Washer Head Tapcon Concrete Screws are a high-quality, long-lasting, and trustworthy fastening system that is ideal for a variety of industrial and construction applications. They offer unmatched strength and durability thanks to their corrosion-resistant finish and distinctive design.

Hot Tags: hex washer head tapcon concrete screws, China hex washer head tapcon concrete screws manufacturers, suppliers, factory, Weld Nut, Copper Open End Blind Rivets, DIN6916 WASHER, Carton Steel Gasket, Cap Nut, Plastic Tapping Screws