Product Description
DIN125 Washer is a flat washer with a round outer diameter and a hole in the center. It is commonly used in various applications to distribute the load of a threaded fastener, such as a bolt or nut, evenly over a larger surface area. The DIN125 standard specifies the dimensions, material, and other requirements for this type of washer.
Parameter Table
| Parameter | Value |
| Material | Steel, Stainless Steel, Brass |
| Finish | Plain, Zinc Plated, Black Oxide |
| Size Range | M1.6 - M64 |
| Standard | DIN125 |
FAQ
Q: What is the difference between DIN125 and DIN9021 washers?
A: DIN125 and DIN9021 washers are both flat washers with similar dimensions and usage. However, DIN9021 washers have a larger outer diameter than DIN125 washers, which provides a larger bearing surface and better load distribution. DIN9021 washers are also thinner than DIN125 washers, making them more suitable for certain applications where space is limited.
Q: What is the maximum temperature that DIN125 washers can withstand?
A: The maximum temperature that DIN125 washers can withstand depends on the material they are made of. Steel washers can generally withstand temperatures up to 300°C, while stainless steel washers can withstand temperatures up to 600°C. Brass washers have a lower temperature limit of around 150°C.
Q: Are DIN125 washers reusable?
A: DIN125 washers can be reused in some applications, but it is generally recommended to replace them with new ones after each use. Reusing washers can cause them to lose their elasticity and reduce their effectiveness at distributing loads evenly over a surface.
Hot Tags: din125 washer, China din125 washer manufacturers, suppliers, factory, High Strength Flat Washer, Large Flat Washer, ANSI ASME B18 21 1 Spring Lock Washer, Toothed Lock Washer, Butterfly Spring Washer, DIN6916 WASHER